RFID Reader User Guide
Our AI Platform supports the integration of RFID readers for Supervisor login and Operator badging. We have integrated the Advantech UTC-100P-R10E which can be installed on the left or right hand side of the touchscreen PC.
Version Support
This feature is supported from V7.8.0
Getting Started
First follow the RFID Reader Installation guide
Setting up Users
1. Turn on the switch “Enable RFID Badge Tracking”
2. If the RFID reader is successfully discovered the RFID reader status will be GREEN

3. Select ADD USER and enter your user details, including scanning of their RFID badge and optional password then select SUBMIT

4. Selecting Supervisor role will give the user access to all system features, Operator role should be used for operators.

Example screen recording showing this feature in action.

Using in Production
Users will by default be logged out after inactivity you have selected from the setup page. If a USER is logged in the top right icon will be Green with the users name, if they are logged out the icon will be gray. Logged in users will be attached to any assembly jobs run in live operating mode.

Troubleshooting
If the RFID reader is not plugged in or detected, the status will be “No RFID reader detected”.

Diagnostic Steps
- When the RFID reader is plugged in it makes an audible beep, if you cannot hear the beep then the RFID reader cable or unit may be damaged.
- Attempt to scan your RFID reader badge, if its detected and supported the RFID reader will make an audible beep
RFID Reader Specifications and Supported Cards
