3D Part Downloads

Camera Mount Wedges

Set the angle of the camera between -35 degrees and + 45 degrees.

Help Guide: Read Installing & adjusting the camera angle for further information on installation.

Recommended Material: PETG / Nylon 12

Recommended Process: 3D printing or Multi Jet Fusion (MJF)

Camera Mount Brackets

The bracket attaches the camera wedge to 40x40mm [1.5 inch x 1.5 inch] Robounits, T-Slots, Rexroth, 8020 or other structural frames.

Help Guide: Read Installing & adjusting the camera angle for further information on installation.

Recommended Material: PETG / Nylon 12

Recommended Process: 3D printing or Multi Jet Fusion (MJF)

Copyright & Usage Notice

All designs, software, documentation, and materials available for download on this page are the exclusive property of Rapta, Inc. and are protected by U.S. and international copyright and patent laws.

These materials are provided solely for the use of current Rapta, Inc. customers with a valid and current software subscription. Unauthorized reproduction, distribution, modification, or use of any materials is prohibited and may result in legal liability.

By downloading these materials, you agree to use them only in accordance with the terms of your subscription agreement with Rapta, Inc.